Home » Shop » Accessories » AEMCMH60 AC/DC Current Measurement Probe Model MH60

AEMCMH60 AC/DC Current Measurement Probe Model MH60

Original price was: $357.00.Current price is: $227.26.

Sale!

64 in stock

SKU: MH60 Category:

AEMC’s Model MH60 is a 100A AC/DC current probe with an insulated BNC output cable that can accurately measure AC and DC current. It uses Hall effect technology at frequencies up to 1MHz. It has proportional mV output for direct readings on oscilloscopes. The MH60 is designed to meet the most stringent demands in electrical measurement. It also meets the latest IEC safety and performance standards. The MH60 is powered by a rechargeable NiMH battery or from a 5V USB power adapter. Its 1.06” (27mm) clamping diameter easily accommodates most conductors allowing AC & DC current to be measured, recorded and/or displayed on recording or measurement instruments.

APPLICATIONS:

  • Measuring in breaker panels
  • Industrial loads
  • HVAC
  • Residential and commercial sites
  • Data logging/recording
  • General AC current measurements
  • Power measurement applications
  • VFD measurements

Specifications:

Maximum Conductor Size 1.06″ (27mm)
Current Range 100AAC/DC
Measurement Range 0.5A to 100AAC/DC
Output 10mV/A
Lead Length 6.5ft (1.9m)
Output Termination BNC connector
Accuracy (Typical) 0.5 to 64A: ±1.15% ±0.1mV
64 to 90A: ±4%
90 to 100Arms: ±5%
Phase Shift at 50Hz ±1°
Bandwidth with Filter 1MHz @ -3dB, 30kHz @ -3dB, 3kHz @ -3dB
Frequency Limitation 100Arms at 45kHz continuously
Power Source 1.2V NIMH AAA rechargeable or 5Vdc power adaptor by female type B micro USB
Battery Life 7 to 8 hours continuous use
Compatibility Any oscilloscopes with BNC input
Dimensions  (H x W x D) 5.43 x 1.93 x 1.1” (138 x 49 x 28mm)
Weight 7.04 oz (200g)
Operating Temperature 14° to +122°F  (-10° to +55°C); 10 to 85% RH
Storage Temperature with Battery -4° to +122°F  (-20° to +50°C); 10 to 85% RH
Pollution Degree 2
Protection IK 04, IP40 (jaws closed), IP30 (jaws open)
EMC EN 61326-1
Safety Compliance EN 61010-2-032, 300V CAT III