0
pipekitparts.com
0
Home » Shop » Accessories » Amprobe AT-6010 Advanced Wire Tracer Kit

Amprobe AT-6010 Advanced Wire Tracer Kit

Original price was: $583.19.Current price is: $448.22.

Sale!

27 in stock

SKU: AT-6010 Category:
Share

Amprobe’s newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The Signal Clamp can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you’re a novice user or an expert, the AT-6000 Amprobe Advanced Wire Tracer kit will help you get the job done fast.

Fetaures

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints shorts and opens
  • High resolution 2.5″” TFT LCD black & white display
  • Simple one button Transmitter operation
  • Two Transmitter signal modes
    1. “High Signal” mode for normal circuits
    2. “Loop” mode for closed loop de-energized circuits
  • Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
  • Comes with custom Amprobe soft carrying case, test leads and accessories
  • Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline
  • Compatible with optional Signal Clamp (CT-400) clamp-on attachment

Specification

Features AT-6010-R Receiver AT-6010-T Transmitter
Measurement category CAT III 600 V
Operating voltage/current 0 to 600 V
Operating frequency Energized: 6.25 kHz
Hazardous voltage detection N/A > 30 V AC/DC
Signal indications Numeric bar graph display and audible beep LEDs
Response time Tip Sensor (Energized/De-energized): 500 ms
Battery voltage monitoring: 5 sec		 Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Current output of signal (typical) N/A Energized circuit:
HI mode: 60 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
Loop mode: 160 mA RMS
Signal voltage output (nominal) N/A De-energized circuit:
HIGH: 33 V RMS, 140 Vp-p
With CT-400:
Loop model:
31 V RMS, 120 Vp-p
Range detection (open air) Tip Sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip Sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)		 N/A
Display size LCD 2.5 in (6.35 cm) N/A
Display dimensions (W x H) 1.45 x 1.93 in
(36.72 x 48.96 mm)		 N/A
Display type Segment LCD LEDs
Display color Black and white Operating mode LEDs: red
Battery status LED: red
Booting time <3 sec <2 sec
Backlight Yes N/A
Operating temperature -4 °F to 122 °F (-20 °C to 50 °C)
Operating humidity 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
Storage temperature and humidity -4 °F to 158 °F (-20 °C to 70 °C), <95% RH
Operating altitude 0 to 6561 ft (2000 m)
Transient protection N/A 6.00 kV (1.2/50μS surge)
Pollution degree 2
IP rating IP 52 IP 40
Drop test 3.28 ft (1 m)
Power supply 4 x AA (alkaline) 8 x AA (alkaline)
Power consumption (typical) 70 mA Hi mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA
Battery life Approx. 25 h Hi mode: approx. 25 h
Loop mode: approx. 18 h
Low battery indication Yes
Fuse N/A 1.6 A, 700 V, fast-acting,
Ø 6x32mm
Dimensions (L x W x H) Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm)		 Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm)
Weight Approx. 0.6 lb (0.27 kg) Approx. 1.25 lb (0.57 kg)
Certifications

Refer to user manual for accessory specifications

Kit Contains AT-6010
AT-6010-R Receiver •
AT-6010-T Transmitter •
TL-6000-INTL Test lead and accessory kit* •
CC-6010 Soft carrying case •
User Manual •
Quick Reference Guide •
1.5 V AA (IEC LR6) Battery 12

* TL-6000-INTL test lead and accessory kit includes:

  • 2 x 1 m test leads (red, black)
  • 1 x 7 m test lead (green)
  • 2 x Alligator clips (red, black)
  • 2 x Outlet blade adapter (red, black)
  • 2 x Outlet round adapter (red, black)