Name: Fluke 80i-2010s AC/DC Current Clamp, 2000 A
Brand: pipekitparts.com
SKU: 80i-2010s
Price: 415.59 USD
Availability: InStock

An open-jaw, clamp-on current probe with a current range of 2000 A, and an accuracy of 0.8%, that is also safety rated for CAT III 1000 V, CAT IV 600 V environments.

Fluke 80i-2010s Specifications

Electrical
Current Range	2000 A AC rms, ± 2000 A DC
Output Sensitivity	1 mV/A
Accuracy	±0.8% of reading ±0.2% of range
Bandwidth for Accuracy Specification	DC to 400 Hz
Load Impedance	>1 MΩ and <10 pF
Frequency Response (Small Signal)	DC to 20 kHz (-3 dB)
Temperature Coefficient	0.1 x specified accuracy for each degree C above 28°C or below 18°C
Working Voltage	1000 V AC RMS or DC
General Specifications
Operating Temperature	14 to 122°F (-10 to 50°C)
Storage Temperature	-22 to 140°F (-30 to 60°C), with battery removed
Operating Humidity	≤90% RH (at 50 to 86°F [10 to 30°C]) ≤75% RH (at 86 to 104°F [30 to 40°C]) ≤45% RH (at 104 to 122°F [40 to 50°C])
Altitude	Operating: 6561.68′ (2000 m) Storage: 39,370.1′ (12,000 m)
Demagnetize Clamp	Open and close the clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less
Power Supply	2 x AA alkaline batteries, IEC LR6
Battery Life	150 hours (typically)
Low Battery Indicator	Yes
Safety	IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Ingress Protection	IEC 60529, IP40
Output to Zero	Auto adjustment with Zero button
Output Cable	60″ (1.5 m) shielded coaxial cable with BNC plug
Maximum Conductor Size	2.05″ (52 mm)
Maximum Jaw Opening	3.2″ (81.5 mm)
Dimensions	4.33 x 10.63 x 1.81″ (110 x 270 x 46 mm)
Weight	1.6 lbs (0.71 kg), including battery